电脑各种中英文信息对照及错误信息总汇

文章摘要：Insert diskette for drive and press any key when ready 插入磁盘到驱动器中后按任意键 Your program caused a divide overflow errorIf the problem persists, contact your program vendor 你的程序导致溢出错误。如果该问题还存在，请联系你的程序供应商 windows has disabled direct disk access to protect your long filenames windows 不能直接访问受保护的长文件名

电脑各种中英文信息对照及错误信息总汇,标签：其它硬件维修,http://www.88dzw.com
Insert diskette for drive and press any key when ready   插入磁盘到驱动器中后按任意键   
Your program caused a divide overflow error
If the problem persists, contact your program vendor   你的程序导致溢出错误。如果该问题还存在，请联系你的程序供应商   
windows has disabled direct disk access to protect your long filenames windows   不能直接访问受保护的长文件名   
The system has been halted. Press Ctrl+Alt+Del to restart your computer   系统挂起，按Ctrl+Alt+Del重新启动你的计算机   
You started your computer with a version of MS-DOS incompatible with this version of windows. Insert a Startup diskette matching this version of windows and then restart   你启动的MS-DOS版本与Windows版本不兼容，请插入与Windows版本匹配的系统盘后再重启   
This version of windows requires a 386 or better processor 该Windows版本需要386以后的CPU支持   
A20 hardware error. Contact technical support to identify the problem   地址线A20错误。联系技术支持来识别该问题   
Starting windows 98...   正在启动Windows 98……   
windows 98 is now starting your MS-DOS-based program   Windows 98正在启动基于MS-DOS的程序   
windows 98 is now restarting...   Windows 98正在重新启动   
Press Esc now to cancel MS-DOS mode and restart windows 98...   按Esc退出MS-DOS 模式，重新启动Windows 98…   
There is an unrecognized command in your CONFIG.SYS file   在你的CONFIG.SYS文件中有不可识别的命令   
The following command in your CONFIG.SYS file is incorrect:   在你的CONFIG.SYS有下列错误命令   
The sector size specified in this file is too large:   该文件中指定的扇区太大   
The following file is missing or corrupted: WIN.COM COMMAND.COM   下列文件丢失或被破坏：WIN.COM和COMMAND.COM   
There is an invalid country code or code page in your CONFIG.SYS file   在你的CONFIG.SYS里有一个无效的国家代码   
There is an error in the COUNTRY command in your CONFIG.SYS file   在你的CONFIG.SYS里有一个错误的设置国家命令   
There is not enough memory for the COUNTRY.SYS file   没有足够的内存来加载COUNTRY.SYS文件   
Remove some drivers from your CONFIG.SYS file, and then try again   请从CONFIG.SYS文件中删除部分驱动程序，然后再试   
Remove some drivers, and then try again   去除一些驱动程序，然后再试。这里的驱动程序是指在CONFIG.SYS中使用device或devicehigh命令加载的程序文件   
Remove some disk drivers from your CONFIG.SYS file, and then try again   从你的(CONFIG.SYS)移去部分程序，然后再试   
The configuration specified in your CONFIG.SYS file is too large for memory   调整你的CONFIG.SYS文件以获得足够大的内存   
You have too many block devices specified in your CONFIG.SYS file   调整你的CONFIG.SYS文件以获得block devices   
The STACKS setting(s) in your CONFIG.SYS file are incorrect   在你的CONFIG.SYS中堆栈设置不正确   
Default stack settings will be used instead   缺省的堆栈设置将被替代使用   
There is an error in your CONFIG.SYS file on line XX   在你的CONFIG.SYS里XX行错误   

上一页  [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25]  下一页